Hoof Jack, bestillingsvare

Solid og lett fotstøtte i plast og aluminium. Fotstøtten er høyde regulerbar og har to praktiske magneter til verktøy.

PrisNOK3 100,00 inkl. mva.
  • Produktinfo
  • Produktanmeldelser (0)

Solid og lett fotstøtte i plast og aluminium. Fotstøtten er høyde regulerbar og har to praktiske magneter til verktøy.

Selges i Mini, Standard og Draft.

Alle str er bestillingsvare

 

Mini 21,3 – 30,5 cm

 

Medium 39,2 – 43,2 cm

 

Std 36,8 – 55,9 cm

The Mini Hoofjack® was developed for the miniature equine because the Standard Hoofjack® was too wide to fit between the front feet of the miniature in addition to being too tall.

The Mini Hoofjack® consists of one mini base, mini cradle, and one mini straight post with rubber cap.

The mini base is made of linear polyethylene and is 7" (18 cm) in height with a base diameter of 13" (33 cm). Overall height adjustment is 8" - 12" (20 – 30 cm) . Two strong pull magnets are included to hold your rasp, nippers, hoof knife etc., close at hand. The base material comes with a three year warranty against horse breakage. 

The Standard Hoofjack® will accommodate a pony up to a small draft or draft cross (hooves up to a size 7). If your horse is unshod and you are uncertain of its shoe size, measure across the widest part of the hoof. If the hoof is less than 7 3/4" you will want to order the Standard or Medium Hoofjack®.

The Standard Hoofjack® consists of one standard base with two magnets, one standard cradle, and one straight post with standard rubber cap. 

The standard base is made of linear polyethylene which is 12" (30cm) in height and has a base diameter of 18" (45 cm). Overall height adjustment is 14" - 22" (35 – 55 cm). Two strong pull magnets are included to hold your rasp, nippers, or hoof knife close at hand. The moulded base material comes with a three year warranty against horse breakage.

The Draft Hoofjack® is for use on hooves larger than a size 7 and consists of one standard base with two magnets, one draft cradle, and one straight post with draft rubber cap. If your draft horse is unshod and you are uncertain of its shoe size, measure across the widest part of the hoof. If the hoof is 7 3/4" or more in width you will need to order the Draft Hoofjack®.

The Draft Hoofjack® consists of one standard base with two magnets, one draft cradle, and one straight post with draft rubber cap.

The standard base is made of linear polyethylene which is 12" (30 cm) in height and has a base diameter of 18" (45 cm). Overall height adjustment is 14" - 22" (35-55 cm). Two strong 90 lb. pull magnets are included to hold your rasp, nippers, or hoof knife close at hand. The molded base material comes with a three year warranty against horse breakage.

  • Supports the hoof for daily care, treatment, bandaging, and more
  • Eliminates the need to put the hoof between your knees or support the horses weight with your body
  • Take your mind off your back and knees and put it back into your work.
  • Pull a shoe, trim, rasp, and nail on a new shoe without ever putting the hoof between your knees or supporting the horse with your body
  • The solution for the leaning horse – let the horse lean on the stand and not on you
  • Accommodates older horses with a limited range of motion
  • Allows the horse to stand in an anatomically correct and comfortable position. A comfortable horse will be more compliant making your job easier and safer.
  • The cradle and straight post can be used on both the front and hind feet meaning you never have to support the weight of the horse with your hands or your body again
  • Use the straight post for clipping or applying hoof polish
  • Apply and remove studs with ease

 https://www.kerckhaert.com/en/Products/Tools/Workshop-tools/Footstands.aspx?ProductID=549

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.